Flexion | Jinpo - materiály a produkty pro energetiku, stavebnictví, petrochemii a plynárenství

References

Bended tubes are a powerful tool of architecture, giving your construction project a modern facade. Our original production technology based on pipe induction heating allows us to create complex steel structures, such as roof structure arches, bearing units of various shapes, bridge frames and more. Using this technology, JINPO PLUS is able to compete with other European manufacturers in this line of work.

Formative section manufacture, e.g. circles with a constant bend radius

Units with diameters from 89 to 720mm, produced with high precision. Completed units include face welded joints and connections to max. 15-17 meter length. Experts appreciate the material's low temper.

Formative section manufacture, e.g. circles with a variable bend radius

Diameters also from 89 to 720mm. Up to 10 different "Rs" possible on a unit 10-12m long. The material's low temper is a great advantage.

Spiral pipe technology

Our production facilities are also capable of providing components for gas, energy and petrochemical industries.

Spiral flexes are a good example - we use our own, patented manufacturing techniques, providing a saving of expenses of up to 30%.

Pipe flexes and serpentine systems

Diameters from 14 to 159 mm (cold) and 89 to 720mm (hot flex).

1. Pipe flexes by ČSN EN 13480
2. Pipe and serpentine steam boiler systems in line with ČSN, EN, DIN, ASTM
3. Bended tubes and products on special demand
4. Manufactured from low-carbon, carbon, microalloyed, low-alloyed, high-alloyed and special P91 steels, abrasive materials and more

Production facilities

Bending machine XOT 40 - cold flex

• pipe bending diameter 14 x 2 ~ 48,3 x 4 mm
• bending radius R = 40 ~ 250 mm
• max. bend angle - 180°

Bending machine XOT 80 - cold flex

• pipe bending diameter 33,7 x 2,6 ~ 76 x 6 mm
• bending radius R = 80 ~ 400 mm
• max. bend angle - 180°

Bending machine KARUSEL - cold flex

• pipe bending diameter 33,7 x 2,6 ~ 76 x 6 mm
• bending radius R = 80 ~ 400 mm
• max. bend angle - 180°

Pressure systems components certified by ITI TÜV Bayern

Bending machine with induction heating - hot flex

• pipe bending diameter 89 ~ 720 mm
• bending by arm Rmax= 3 000 mm
• bending by thrust pulley  R = 250 ~ 60 000 mm
• max. bend angle - 90° ~ 110° (arm bend)

References

Contact:  

Jana Steinigerova 

tel. +420 597 469 191,

cell +420 725 420 889,

e-mail: steinigerova@jinpo-plus.cz